Modify Selection
- Hazard prevention and control:
- Dust control
- or
- Removal of deposited dust
- or
- Water infusion
- or
- Wet drilling
- or
- Mist drilling
- or
- Foam application
- or
- Sealing of dust sources
- or
- Filtration systems
- or
- Air curtain systems
- or
- Water spraying
- or
- Water mist systems
- or
- Wetting of deposited dust
Home Links
Results 121 - 128 of 128
-
1/1/1993 - Reports of InvestigationsThe design and evaluation of two total mill ventilation systems are described. Both systems proved to be very effective at reducing respirable dust levels in a cost-effective manner, were easy to install, and required minimal maintenance.
-
1/1/1983 - Reports of InvestigationsIn Europe, water infusion is used widely to reduce generation of respirable dust during mining. Its use in the United States is limited to a few plow operations in the Pocahontas No. 3 Coalbed. This Bureau of Mines report describes the technology for in...
-
1/1/1977 - Reports of InvestigationsThis Bureau of Mines report deals with water infusion of coalbeds, which can control methane emission at face areas during developmental mining and which may sometimes suppress dust. Studies show that water infused into the coalbed flows through the fra...
-
1/1/1974 - Reports of InvestigationsThe periphery of longwall panels in the Pocahontas No. 3 Coalbed is characterized by a zone of reduced permeability that inhibits the natural drainage of methane. However, natural drainage holes drilled during development have been found to reduce the g...
-
1/1/1972 - Reports of InvestigationsThe effect of water infusion on the flow of methane and on the production of dust was investigated at an active face in the Pittsburgh coalbed. The average total flow of methane at the face decreased by approximately 79 percent, whereas the flow from th...
-
1/1/2012 - Guides and manuals, Reports of InvestigationsMined ore undergoes crushing, grinding, cleaning, drying, and product sizing as it is processed, generating harmful dust. This handbook reviews technologies for lowering dust levels below the permissible or recommended occupational exposure limits.
-
This handbook was developed to identify available engineering controls that can assist underground and surface metal/nonmetal mining operations in reducing worker exposure to respirable silica dust.
-
This handbook was developed to identify available engineering controls that can help the industry reduce worker exposure to respirable coal and silica dust.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program